goto UNSW  home page  
Contacts Library myUNSW WebCT
 Photovoltaics & Solar Energy - 3642
PRINT THIS PAGE

Program Summary

   
   
 
Campus: Kensington Campus
 
 
Career: Undergraduate
 
 
Typical Duration: 4 Years
 
 
Typical UOC Per Session: 24
 
 
Min UOC Per Session: 3
 
 
Max UOC Per Session: 27
 
 
Min UOC For Award: 192
 
 
Award(s):
 
 
Bachelor of Engineering (Major)
 
  

Program Description

The undergraduate engineering degree in Photovoltaics (PV) and Solar Energy was established in 2000 and is a four year full-time program. It is the first of its kind internationally and won the Education and Awareness Award at the 2004 Energy and Water Green Globe Awards held by the Department of Energy, Utilities and Sustainability. The program has been established in response to rapid growth in the industry in recent years in both manufacturing capacity and job creation. Global manufacturing of solar cells expanded 67% in 2004, and a further 45% in 2005 - growth reminiscent of the electronics industry in the booming 1980s.

The program includes training in technology development, manufacturing, quality control, reliability and life-cycle analysis, cell interconnection and encapsulation, a range of solar cell applications, system design, maintenance and fault diagnosis, marketing, policy development and the use of other renewable energy technologies. Emphasis is placed on gaining hands-on experience of working with solar energy devices, modules and systems.

Innovative teaching techniques have been developed to enhance the learning environment including the 'Virtual Production Line', 'Virtual World Solar Car Challenge', and 'Virtual Survivor'. UNSW academics in the photovoltaic field have been consistently ranked amongst the leaders worldwide through international peer review. This team has held the world record for silicon solar cell efficiencies for decades and were responsible for developing the most successfully commercialized new photovoltaic technology internationally throughout the same period. 2006 saw an explosion of interest in the School's technologies from major industry players all around the world.

Second Area of Specialisation
The cross-disciplinary nature of photovoltaics and renewable energy applications necessitates many PV engineers possessing broad engineering backgrounds or else working in teams with other engineers. A good example is the UNSW Solar Car Project involving PV engineers, electronics engineers, control engineers, mechanical engineers, chemical engineers, power engineers, biomedical engineers, computer engineers, and communication engineers. Therefore it is important for photovoltaic engineers to have a broader understanding of other engineering disciplines.

A unique feature of this program is that in Year 2, students have the opportunity to select a strand to complement their education in Photovoltaics and Solar Energy. Each strand comprises 18 units of credit with the opportunity to subsequently select additional electives in the corresponding area in the final two years, subject to the approval of the Undergraduate Coordinator. The strands available are listed below and cover areas such as computing, electronics, mathematics, mechanical engineering, civil engineering, physics, chemical engineering, and architecture. Students may also formulate their own strands subject to the approval of the Undergraduate Coordinator.

Selection of a second area of specialization is subject to the program rule that states that no more than 60 UOC of first-year level courses may be counted toward the BE degree in Photovoltaics and Solar Energy.

Note:

Photovoltaics and Solar Energy is also available as a component of the combined degree programs
BE (Pvse)/BSc, program 3655 programs/3655
BE (Pvse)/BA, program 3656 programs/3656
BE (Pvse)/BCom, program 3715 programs/3715

For details of all academic requirements for this program, see http://www.eng.unsw.edu.au/rules

Program Objectives and Learning Outcomes

Program Structure

The program structure below gives one sequence of courses that fulfils the requirements of the degree. The timing of the general education courses and elective courses may be modified to optimize the student's choice of courses. While some courses are given twice a year, many courses are given only once a year and some once every two years. In addition, courses may have prerequisites and exclusions. Thus students should plan their enrolments appropriately.

PLEASE NOTE:
  • The first program structures listed (Years 1 and 2) are under the new flexible structure for students who commenced in 2006 and onwards.
  • The program structures for students who enrolled prior to 2006 (Years 3 and 4) are listed after Year 2.
Year 1 (Flexible)

Choose ONE of:
And ONE of
And ONE of
Plus these following 3 courses:
Plus choose 2 electives from the Year 1 Elective list http://www.eng.unsw.edu.au/rules/elective.htm

Suggested Year 1 Electives for this program are:
  1. COMP1911 is an acceptable alternative for ENGG1811
  2. Not all courses are offered in both sessions but students should complete 24 UOC in each session.
Year 2
  • Strand elective (6UOC)

And ONE of
  • Strand elective (6UOC)
Note: When a student takes ELEC1111 as an elective in Year 1, they are required to undertake a strand of 18 units of credit. If, however, a student does not take ELEC1111 in Year 1, they are required to take it in Year 2 and only complete a strand of 12 units of credit.
For information relating to Years 3 and 4 of the Flexible program structure please refer to the school website http://www.pv.unsw.edu.au


PROGRAM STRUCTURE FOR STUDENTS WHO ENROLLED PRIOR TO 2006 IS AS FOLLOWS

Year 3
  • Professional Electives (18 UOC)
  • Selected Strand (continued) (6 UOC)
  • General Education (3 UOC)
Please note: ELEC2031 will not be offered from 2007. Students should have completed this course in 2006. If students have not successfully completed this course, they should contact the School Office.
Year 4
  • Professional Electives (12 UOC)
  • General Education elective (6 UOC)
Where students have a weighted average mark (WAM) less than 65, they should enrol in the group thesis SOLA4914 and SOLA4915.

Please note: ELEC4010 and ELEC4011 will not be offered from 2007. Students should substitute ELEC4122 Strategic Leadership & Ethics for these courses.

Years 2 & 3 Strand Options

Please note that the strands listed below are subject to change and may not be available every year. The strands published here are for students commencing the second year of their program. Third year students should complete the strand courses they have already nominated and consult the School Office as required.

Strand 1 Computing
And choose from the following to complete the strand:
Note: Selection of this strand is subject to the program rule that states that no more than 60 units of credit of first-year level courses may be counted towards the BE degree in PV & SE. Students interested in this strand should take the appropriate courses in year 1 that will allow them to meet this requirement.
Strand 2 Electronics
And choose from the following to complete the strand:

Strand 3 Electric Energy
Note: Students taking this strand are encouraged to substitute ELEC3105 Electrical Energy for a professional elective.

Strand 4 Communications and Control
And choose from the following to complete the strand:

Strand 5 Mathematics
And choose one from the following to complete the strand:

Strand 6 Mechanical Engineering
And choose from the following to complete the strand:
Strand 7 Chemical Engineering
Strand 8 Physics
And choose from the following to complete the strand:
Strand 9 Faculty of the Built Environment
And choose from the following to complete the strand:
Professional Electives for Years 3 & 4

Because of timetable clashes not all combinations or courses are possible
The following courses are offered every second year and will not be offered in 2007:
SOLA5050, SOLA5052, SOLA5056.

Electives can also be chosen from the courses listed as electives for Electrical Engineering, Mechanical Engineering, Civil Engineering, Environmental Engineering, Computer Science and Engineering and Chemical Sciences Engineering for which appropriate prerequisite requirements have been satisfied and which conform to the credit point requirements. Approval to substitute these electives for SOLA professional electives must be sought from the Undergraduate Coordinator. Substitutions will be restricted to a maximum of two.

The program selected by each student must be approved by the Head of School. Not all electives are available each session or each year, nor is the full range available to part-time students. Students are advised each year of the timetable of available electives. Substitution is not permitted if it unduly restricts the range of subjects studied to only one area of Photovoltaic Engineering.

General Education Requirements

Honours

Academic Rules

Fees

For information regarding fees for UNSW programs, please refer to the following website:  https://my.unsw.edu.au/student/fees/FeesMainPage.html

Industrial Experience Requirements


Area(s) of Specialisation

URL for this page:

© The University of New South Wales (CRICOS Provider No.: 00098G), 2004-2011. The information contained in this Handbook is indicative only. While every effort is made to keep this information up-to-date, the University reserves the right to discontinue or vary arrangements, programs and courses at any time without notice and at its discretion. While the University will try to avoid or minimise any inconvenience, changes may also be made to programs, courses and staff after enrolment. The University may also set limits on the number of students in a course.