goto UNSW  home page  
Contacts Library myUNSW WebCT
 Photonic Engineering - 3644
PRINT THIS PAGE

Program Summary

   
   
 
Campus: Kensington Campus
 
 
Career: Undergraduate
 
 
Typical Duration: 4 Years
 
 
Typical UOC Per Session: 24
 
 
Min UOC Per Session: 3
 
 
Max UOC Per Session: 27
 
 
Min UOC For Award: 192
 
 
Award(s):
 
 
Bachelor of Engineering (Major)
 
  

Program Description

The School offers an up-to-date program targeting photonics engineering in line with the changing industry needs and market requirements. It offers students a complete coverage of photonics as an enabling technology for areas such as telecom, sensing, data storage and optical displays. The Degree programs are accredited by the Institution of Engineers Australia as meeting the requirements for admission to graduate membership.

The undergraduate curricula are being continuously and progressively revised to provide flexible training to suit the future needs of students. The program stresses the importance of design as an integral part of the engineer's capabilities and emphasises the multi-disciplinary requirements of this exciting profession.

Students have the option of completing combined programs leading to the award of the Bachelor of Engineering in Photonic Engineering in combination with a BSc, BA or BCom degree or a concurrent program for BE and the Master of Biomedical Engineering.

Note

Photonic Engineering is also available as a component of the combined degree programs
BE (Phtn Eng)/BSc program 3634,program 3634
BE (Phtn Eng)/BCom, program 3715, program 3715

For details of all academic requirements for this program, see http://www.eng.unsw.ed.au/rules/

Program Objectives and Learning Outcomes

Program Structure

The program structure below gives one sequence of courses that fulfils the requirements of the degree. The timing of the general education courses and elective courses may be modified to optimize the student's choice of courses. Suggestions for other course sequences consistent with timetabling and availability can be found on the School website at http://www.eet.unsw.edu.au/progrms/undergraduate_single.htm. While some courses are given twice a year, many courses are given only once a year. In addition, courses may have prerequisites and exclusions. Thus students should plan their enrolments appropriately.

PLEASE NOTE:

Year 1 (Flexible)
Choose ONE of:
And ONE of:
And ONE of:
Plus these following 3 courses:
Plus choose 2 electives from the Year 1 Elective list
http://www.eng.unsw.edu.au/rules/elective.htm

Suggested Year 1 electives for this program are:
  1. ENGG1811 is an acceptable alternative for COMP1911
  2. Not all courses are offered in both sessions but students should complete 24 UOC in each session.

Year 2

Session 1

Session 2
For information relating to Years 3-4 of the flexible program structure please refer to the school website http://www.eet.unsw.edu.au
PROGRAM STRUCTURE FOR STUDENTS WHO ENROLLED PRIOR TO 2006 IS AS FOLLOWS:

Year 3

Session 1
TWO 3UOC General Education Courses need to be taken in Year 3 Session 1.

and

PHYS3760, Laser and Optoelectronics Lab, (Pre-requisite: 96UOC) 3UOC

Session 2
and
PHYS3310, State Devices, 3UOC

L3 Elective courses list:
Year 4

Session 1
  • One L4 Elective (6 UOC)

Session 2
and
L4 Elective, 6 UOC

Microelectronics
  • Energy Systems
Signal Processing
Systems and Control
Data and Mobile Communications

Photonics

Business Administration

ELEC4445, Entrepreneurial Engineering, 6 UOC

Honours

Academic Rules

Fees

For information regarding fees for UNSW programs, please refer to the following website:  https://my.unsw.edu.au/student/fees/FeesMainPage.html

Industrial Training

All students are required to undertake mandatory industrial training. Each student is personally responsible for arranging and completing the full 60 days compulsory industrial training prescribed as part of the requirements for the award of the degree. Industrial training should be concurrent with enrolment and is best accumulated in the summer recesses at the end of the second and third years of the program, but it must be completed before graduating .Industrial training should be in the area of engineering design and/or project work, but limited credit may be given for work of a non-engineering nature. It is preferable that all 60 days be completed with one or two organisations. Students should, in general, work with professional engineers and take an active part in their work in the design of equipment, solving of engineering problems, or any other work that is relevant to the profession of Engineering.

Students are required to submit a written report on their industry placements, typically 2000-3000 words, describing the organisation of the Company, summarising the work done and the training received. The report must be accompanied by certification of their industrial placement by a senior company representative.

Industrial Training will be assessed as a compulsory part of the course ELEC4122 Strategic Leadership and Ethics. Students must complete the industrial training requirement in order to receive a completed assessment for this course, but the industrial training assessment does not affect the mark received for ELEC4122.

Further Information

Rules Governing Substitutions, Pre-requisites and Student Exchanges
To suit the special abilities or needs of individual students, a limited number of course substitutions are permitted within each program. Any such substitution must have prior approval of the Head of School.

Substitutions must be of at least the same length and level as the prescribed course.
Core courses may not be substituted with other courses.

Substitution is not normally permitted if it unduly restricts the range of courses studied to only one area of specialisation.
Progression to ‘next level’ courses is not permitted without satisfying the nominated pre-requisites.

In the case of a combined degree program, accreditation of any course in more than one program is not permitted.
Prior School consent is required for any accredited substitution. This includes any courses taken from other schools at the student’s own initiative.

Substitution is not normally permitted in the first two years of the program.
Substitution of one postgraduate course within the School is permitted, provided a similar course is not offered at the undergraduate level.
Student exchanges are permitted, and students are encouraged to organise their exchange in the second session of their third year in order to simplify the process of accrediting substitutions.

Rules Governing Elective Courses
12 units of credit from the L3 and L4 electives provide the breadth and the depth required for an Electrical, Telecommunications and Photonic Engineering Degree. These electives are provided from the six disciplines within the School. In addition, L3 electives include courses from other Schools. Students must have completed at least 36 units of credit of Year 4 core and L4 elective courses in order to satisfy the requirements for graduation. Therefore students should choose their L3 and L4 electives accordingly.

Note: Students are not permitted to count more than 60 units of credit (excluding the 12 units of credit of general education courses) of Year 1 courses towards the degree, as the required breadth and depth of the Electrical/Telecom/Photonics engineering program would not be obtained otherwise.

Transfer from Other Programs/Advanced Standing Students/Mid-Year Entry
The introduction of year 1 (L1), year 3 (L3) and year 4 (L4) electives accommodates students who are transferring from another program, are advanced standing or are in mid-year entry, as it allows them to complete required number of units of credit within the stipulated time of the normal program.

Area(s) of Specialisation

URL for this page:

© The University of New South Wales (CRICOS Provider No.: 00098G), 2004-2011. The information contained in this Handbook is indicative only. While every effort is made to keep this information up-to-date, the University reserves the right to discontinue or vary arrangements, programs and courses at any time without notice and at its discretion. While the University will try to avoid or minimise any inconvenience, changes may also be made to programs, courses and staff after enrolment. The University may also set limits on the number of students in a course.