UNSW Handbook Program - Aeronautical Eng (Conversion)

PRINT THIS PAGE

Aeronautical Eng (Conversion) - 4425

Area(s) of Specialisation

Program Summary


	Faculty: UNSW@ADFA (Australian Defence Force Academy)
	Contact: UNSW@ADFA Student Gateway
	Campus: University College Campus
	Career: Undergraduate
	Typical Duration: 1.5 Years
	Typical UOC Per Session: 24
	Min UOC Per Session:
	Max UOC Per Session:
	Min UOC For Award: 96
	Award(s):
	Bachelor of Engineering (Major)

Program Description

The Bachelor of Technology (Aeronautical) program and the Bachelor of Engineering program in Aeronautical Engineering have been designed so that a graduate with the Bachelor of Technology program may, under normal circumstances, articulate to the Bachelor of Engineering in Aeronautical Engineering program with 12 - 18 months of additional study.

Program Objectives and Learning Outcomes

The program objectives and learning outcomes for this program are identical to Bachelor of Engineering (Aeronautical Engineering).

Program Structure

The actual program will depend upon when the Bachelor of Technology (Aeronautical) was completed and the current Bachelor of Engineering in Aeronautical Engineering program. Please note that the options previously completed in the Bachelor of Technology program will not be available to the student in the Articulation Program and selection will be subject to the approval of the Head of School. Pre-requisite requirements will apply.

Sample Program

ZACM3021 Structural Mechanics 1 (3 UOC)
ZACM3040 Flight Dynamics and Control (3 UOC)
ZACM3433 Compressible Flow (3 UOC)
ZACM4010 Aircraft Design 3 (3 UOC)
ZACM4011 Aircraft Design 4 (3 UOC)
ZACM4020 Computational Structures (3 UOC)
ZACM4021 Structural Mechanics 2 (3 UOC)
ZACM4030 Heat Transfer (3 UOC)
ZACM4050 Aero Eng: Proj/Thesis/Prac Exp (6 UOC)

Academic Rules

1.0 Faculty Regulations for Undergraduate Students
1.1 A student must comply with the Faculty Regulations for Undergraduate Students. In the event of a conflict, the rules for the Bachelor of Technology take precedence over the Faculty Regulations for Undergraduate Students.

2.0 Degree Requirements
2.1 To qualify for the degree of Bachelor of Technology, a candidate shall normally be enrolled for a minimum of six sessions and gain a minimum of 144 units of credit (normally 24 units in each full-time session).
2.2 A candidate completing a Standard Program shall complete courses, in the years prescribed, as set out in the relevant schedule.
2.3 A candidate completing a Non-Standard Program shall, subject to the requirements of Rule 2.4 (below), timetabling requirements and approval of the appropriate Heads of School, be permitted to enrol in any one year in courses selected from more than one year of the relevant schedule.
2.4 Before a candidate’s enrolment will be accepted for any course, the candidate must have completed the relevant pre-requisite courses shown in the Course Catalogue, except where the Course Authority for the appropriate course approves otherwise.

3.0 Practical Experience Requirements
3.1 Before graduation a candidate shall complete 20 days of approved practical experience which must be done in one block with one employer.

Fees

For information regarding fees for UNSW programs, please refer to the following website: https://my.unsw.edu.au/student/fees/FeesMainPage.html

Enrolment in this progam is restricted to Midshipmen, Officer Cadets and Advanced Students in the Australian Defence Force and equivalent ranks from selected foreign Defence Forces.